Beli harga sensor proximity di monotaro.id

Cylindrical Inductive Proximity Sensor (Tipe Kabel)Proximity sensor induktif Seri PR memiliki performa sensing yang kuat dan ketahanan noise yang sangat baik dengan IC sensor khusus yang dikembangkan oleh Autonics. Tersedia dalam beragam ukuran dan jarak sensing. Sensor standar silindris induktif dapat digunakan pada beragam aplikasi yang memerlukan deteksi metal non-kontak. Seri PR tersedia dalam tipe DC 2-wire, DC 3-wire, AC 2-wire.

* Cannot be used with capacitive proximity sensors.

Rectangular Standard Proximity Sensor, Sensing distance 10 mm, NO, DC 3-wire, NPN

Proximity sensor cleaning agent resistance and rust prevention performance optimized for the food and beverage industry. Ensures resistance to typical cleaning agents and disinfectants in the food industry. * The response frequency is an average value. As for the measurement conditions, the standard sensing object is used, the distance between the sensing objects is twice that of the standard sensing object, and the set distance is 1/2 of the sensing distance. * Do not bend the cord repeatedly in an environment of 100°C or higher.

Proximity Sensor M8 DC Two-wires models NO

Easy-to-use, Simple Magnetic Proximity Sensor- Permanent magnetic used to operate the reed switch.- Ideal for detecting opening and closing of doors. Switching capacity- Maximum operating voltage: 100V DC- Maximum operating current: 0.1A DC- Maximum switching capacity: 10W (for both open and closed contacts)

Proximity Sensor M5 Pre-wired Models (2 m) NO

Proximity Sensor M8 DC Three-wires models NO

Abundant variations of flat type standard thickness 6mm and detection distance 3mm (TL-W3MC1) Aluminum die-casting type is also available in series

Fluororesin coated proximity sensor. Outstanding sputter resistance

Metal Head for long-distance Detection thatWithstands Harsh Environments Where theWorkpiece Can Rub against the Sensor- Completely stainless-steel housing- Long-distance detection equivalent to or greater than ProximitySensors with Resin Heads- More than 20 times the durability of Proximity Sensors with Resin Heads- Spatter-resistant Models with fluororesin coating are available.- Aluminum chip immunity- Pre-wired Smartclick Connector Models are also available. Protection Circuits: Surge suppressor, Load short-circuit protection. Ambient Temperature Range: Operating : -10 to 70°C, Storage : −25 to 70°C (with no icing or condensation).

Small shield type sensor head. Can be embedded in metal Robot code standard adoption

"Long-distance detection" to equipment that does not cause sudden stop Long-distance stable detection technology that makes it difficult for collisions to occur even if the seating position of the work varies, even if the dog is separated due to vibration of the device "Thermo Distance control x IoT " "Improved usability" makes it possible to restore equipment in a short time without skills Replacement time is only 10 seconds using "e-jig" "Oil resistance ability value 2 years" further reduces sudden stoppage due to failure "Miniaturization" Improved flexibility in equipment design It is possible to unify stock models by consolidating models that are easy to place on welding jigs. If it is a 3-wire system, "IO-Link" enables early detection of abnormal parts and phenomena. "Condition monitoring" realizes predictive maintenance of equipment.

Flat Capacitive Sensor with a Thickness of Only 10 mm- Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only 10 mm thick.)- Direct mounting onto a metallic surface is possible. - Ambient temperature Operating: -10 to 55°C , Storage: -10 to 55°C (no icing)- Ambient humidity Operating: 35 to 95%, Storage: 35 to 95% (no condensation)- Temperature influence ±15% max. of sensing distance in temperature range of -10 to +55°C (As the basis for sensing distance of 23°C)- Voltage influence ±2.5% max. of sensing distance in rated voltage range ±10%. (As the basis for sensing distance at standard power voltage)- Insulation resistance Between charged parts and the case: 50 MΩ min. at 500 VDC- Dielectric strength Between charged parts and the case: 500 VAC 50/60 Hz for 1 min- Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h- Material Case: Heat-resistant ABS resin, Sensing surface: Heat-resistant ABS resin

Bypass pipe mounting type. Amplifier built-in type, space-saving

Small shield type sensor head. Can be embedded in metal Power supply voltage range 5 to 24 VDC.